Home > Products > 25mm Woven Honeycomb Blind Fabric > Single Cell Honeycomb Shades

Single Cell Honeycomb Shades

Model number:HW-B01 / HW-B02 / HW-B03 / HW-B04

  • aperture : 25mm
  • Product Details
25mm Woven Honeycomb Blind Fabric

Looking for a versatile mid-size honeycomb fabric option? Our 25mm woven honeycomb blind fabric is available in single cell and pleated structures, using a tightly woven polyester construction rather than spunlace non-woven fibers. The 25mm cell size sits between our compact 16-20mm range and our larger 38-45mm range, giving a balance of insulation and a moderate retracted stack — a common mid-range choice for standard residential windows. Below you'll find full specifications, structure comparison, application guidance, and answers to the questions buyers ask most.

Product Specifications

ItemSpecification
MaterialWoven polyester fabric (not non-woven)
Cell Size25mm (also available in 16mm, 20mm, 38mm, 45mm on request)
Structure TypesSingle Cell, Pleated (Accordion)
Light ControlSemi-blackout / Light-filtering sheer (blackout available with backing option)
Width RangeCustom cut, up to 2800mm (site-dependent)
Height RangeCustom cut, up to 2800mm (site-dependent)
Fire RatingAvailable to EN 13501-1 / ASTM E 648 / GB 8624
ColorfastnessGrade 4+ under international standard (ISO 105 / AATCC 16 / GB/T 8427)
Environmental ComplianceOEKO-TEX 100 / CPSIA / GB 31701 available
Operation SystemsCordless, top-down bottom-up, day & night dual fabric, motorized

1786515795845480

Why Woven Fabric Is Chosen Over Non-Woven

Woven honeycomb fabric is made by weaving polyester yarn into a defined pattern, giving it a more textured, fabric-like appearance compared to spunlace non-woven material. This makes it a common pick where appearance and texture matter as much as function.

  • Fabric texture and appearance: The visible weave pattern gives a more premium, textile-like look than the flatter surface of non-woven fabric, often preferred for decorative or higher-end interiors.

  • Balanced insulation and stack height: The 25mm cell holds more air than 16-20mm sizes while retracting more compactly than 38-45mm fabric, suiting standard residential windows.

  • Light control & privacy: Semi-blackout and light-filtering options soften incoming light while maintaining privacy; blackout performance can be added with a backing layer if full light-block is required.

  • Noise reduction: The hollow honeycomb cells absorb some sound, with a moderate dampening effect appropriate for typical residential rooms.

  • Crease memory: Heat-setting during manufacturing locks the woven fabric's folds in place, keeping pleats sharp and even through repeated raise-lower cycles.

Structure Comparison: Single Cell vs Pleated

At 25mm, we offer two structure options, each suited to a different balance of insulation and compactness.

StructureDescriptionBest For
Single CellOne row of hexagonal cells; retains a hollow air pocket for insulationStandard residential windows needing a balance of insulation and stack height
PleatedAccordion fold without a hollow cell; flatter, more compact stackWindows with shallower headrail space where a slimmer stack is preferred

Not sure which structure suits your installation? Send us your window dimensions and target light control level, and we'll recommend a configuration and follow up with fabric samples within 24 hours.

What Defines High-Quality Woven Honeycomb Fabric

Woven fabric quality depends on different factors than non-woven material. Four areas separate premium woven fabric from fabric that loosens, frays, or fades quickly:

  • Weave density and uniformity: Premium fabric has a tight, even weave with no visible gaps or thin spots when held up to light. Loosely woven fabric stretches out of shape over time.

  • Crease consistency: Precise heat-setting keeps folds sharp and evenly spaced through tens of thousands of raise-lower cycles. Lower-grade fabric loses its crease and the pleats go uneven.

  • Yarn dye consistency: Evenly dyed yarn avoids visible streaking or color variation across the panel width, especially noticeable in wider windows.

  • Edge finishing: Cut edges should be sealed cleanly with no fraying or loose threads, which is a more common failure point on woven fabric than on non-woven material.

Testing Standards We Reference

We test and certify woven honeycomb fabric against the major international benchmarks so buyers can match documentation to their target market's regulatory requirements.

Test TypeEU StandardUS StandardChina Standard
Tensile StrengthISO 13934ASTM D5034GB/T 3923
ColorfastnessISO 105AATCC 16GB/T 8427
Flame RetardancyEN 13501-1ASTM E 648GB 8624
Environmental / Chemical SafetyOEKO-TEX 100CPSIAGB 31701

Application Scenarios

  • Standard residential windows: Single cell 25mm fabric provides a balanced level of insulation and privacy for everyday bedrooms and living rooms.

  • Mid-size French doors and sliding doors: Pleated 25mm structure's compact stack fits typical door headrail spaces without a bulky profile.

  • Decorative interiors: The visible woven texture suits interiors where the shade fabric itself is part of the design, not just a functional cover.

  • Offices and light-filtering needs: Semi-blackout woven fabric softens glare while keeping the space bright, a common fit for meeting rooms and workstations near windows.

  • Volume residential projects: The 25mm size is a practical mid-range default for developers standardizing across many units without needing size-specific customization.

Need fabric samples for a specific project? Tell us your target market, structure preference, and whether you need semi-blackout or light-filtering fabric, and we'll send technical datasheets and physical swatches within 24 hours.

FAQ

1. What does "25mm" cell size mean?

The width of each hexagonal cell (or fold depth for pleated) when fully closed — a mid-range size balancing insulation and stack height.

2. What's the difference between woven and non-woven fabric?

Woven fabric has a visible textile-like weave pattern; non-woven has a flatter surface and is more commonly used for foil-backed blackout.

3. Can 25mm woven fabric achieve full blackout?

Standard fabric is semi-blackout or light-filtering. Full blackout is possible with an added backing layer — let us know if you need it.

4. Single cell or pleated — which should I pick?

Single cell keeps a hollow air pocket for more insulation; pleated stacks flatter. Choose pleated when headrail depth is limited.

Have a specific project spec in mind? Message us your structure preference and target fire/environmental standard, and we'll follow up with a quote and sample fabric within 24 hours.


Next: Pleated Shades 2026-08-12
🏠 Home 📦 Products 📞 Contact
8613712467763
sales@hornethoneycombblinds.com
Back to top
Get A Quote
  • Please enter your name.
  • Please enter your E-mail.
  • Please enter your Phone or WhatsApp.
  • Please refresh this page and enter again
    Please fill in your requirements in detail so that we can provide a professional quotation.